Sony VGN-T140P VAIO User Manual page 94

Connecting a printer
You can easily connect a printer to your computer or port replicator (if applicable). The New Hardware Wizard enables you
to easily install the printer software, but some printers require separate driver software installation. See the instructions
that accompanied your printer for more information.
If you are using the port replicator, connect the AC adapter to the port replicator. The port replicator must be powered
by the AC adapter to function properly.
To connect a USB printer
1.
Plug the USB cable into the USB port
2.
Plug the other end of the USB cable into the USB port on the printer.
3.
Turn the printer on. The Found New Hardware Wizard appears on the computer screen.
Connecting a USB Printer
See the guide that accompanied the printer for more information on its installation and use.
To connect a printer (port replicators only)
1.
Connect the port replicator to the computer. See
2.
Plug the printer cable into the Printer port
3.
Plug the other end of the printer cable into the port on the printer, and turn the printer on.
Connecting a Printer
on your computer. See Locating Controls and Ports.
Connecting the Port Replicator
on your port replicator. See
for instructions.
Locating Controls and Ports.
Page 94