Table of Contents
Advertisement
Quick Links
IP Digital to RF Analog Synthesizer
MPEG-2 / H.264
for up to 16 NTSC Modulated Channels
Stock #
6566
© Blonder Tongue Labs, Inc.
All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
Model Name
Description
Clearview™ NTSC16 IP Digital to RF Analog Synthesizer; 16 Channels
ISO 9001:2015 Certified
Clearview
/ H.265
(AVC)
NTSC16
™
Quick Guide
(HEVC)
P/N: 651252700A | Rev: 040121
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blonder tongue Clearview NTSC16
Summary of Contents for Blonder tongue Clearview NTSC16
- Page 1 Clearview™ NTSC16 IP Digital to RF Analog Synthesizer; 16 Channels P/N: 651252700A | Rev: 040121 © Blonder Tongue Labs, Inc. ISO 9001:2015 Certified All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
- Page 2 • Power Cord with IEC C13 line socket and 3-pin Type B NEMA 5 plug (QTY=1) Step 1: Setup and Install of the Unit The Clearview NTSC16 is designed to be installed in a standard 19-inch (483 mm) rack (EIA 310-D, IEC 60297, and DIN 41494 SC48D).
- Page 3 Clearview NTSC16 Quick Guide Step 2: Connecting to a PC/Laptop ETHERNET ACCESS: Local or remote communication with the unit is only possible through a GUI-based menu via web browser (Chrome or Firefox is recommended). Before you can communicate with the unit, you must configure your computer's IP address to be in the same subnet as the units default IP address.
- Page 4 4 Clearview NTSC16 Quick Guide Step 3: Login to the Controller An Ethernet Cable should be connected between your PC and the “Control” port on the unit. Open a Web browser (Chrome or Firefox recommended) and type http://172.16.70.1 in to your web browser to view and configure your Clearview NTSC16.
- Page 5 Clearview NTSC16 Quick Guide Step 4: Basic Configuration (continued) System Settings Go to the “System” tab to change the System Settings, including unit identification and network settings. The user is also able to reboot the unit and upload/download configuration files. Once downloaded, the settings can be applied to the unit or the user can choose to set the unit back to the default factory settings with a click of a button.
- Page 6 6 Clearview NTSC16 Quick Guide Step 5: Decoder Configuration Decoders: Settings The final information to setup within the unit is located in the “Decoders:” > “Settings” tab. Decoders: Settings Page - Example On this page, the user is able to set up the Video and Audio Pipeline settings, located on the right side.
- Page 7 Clearview NTSC16 Quick Guide Non-Standard Network Configuration Example network configuration: 1. The Video Source device's control port is configured to be at 192.168.3.18. 2. The Clearview NTSC IP Video ports are configured to be at 192.168.6.71 192.168.6.86 (DC1:1 at “192.168.6.71”, DC2:1 at “192.168.6.79”, etc.) with subnet masks of 255.255.0.0.
- Page 8 A Return Material Authorization (RMA) Number is required on all products returned to Blonder Tongue, regardless if the product is being returned for repair or credit. Before returning product, please contact the Blonder Tongue Service Department at 1-800-523-6049, Ext. 4256 or visit our website: www.blondertongue.com...
Need help?
Do you have a question about the Clearview NTSC16 and is the answer not in the manual?
Questions and answers