Advertisement
2. Put the cover aside and PCBs can be seen as below
3. Undo 4x Phillips head screws and unplug 3x connectors on the PSU. The four screws are circled in yellow below
4. Take out the power supply and put the new one in and follow the previous steps in reverse.
Below are the connector descriptions.
https://support.etcconnect.com/HES/Consoles/Hog_4/Hardware/Replacing_the_Power_Supply_Unit_on_a_DP_8000
Updated: Fri, 17 Sep 2021 16:17:57 GMT
Powered by
2
Advertisement
