Network Access Controller
Network Access Controller
Security Features
•
Support data encryption: WEP(64/128-bit), WPA, WPA2,
IPSec VPN.
•
Support various authentication methods: WPA-PSK, WPA2-
PSK,
IEEE 802.1x(EAP-MD5, EAP-TLS, CHAP, PEAP).
•
Provides VPN termination of IPSec tunnels to enhance
wireless security.
•
Support VPN pass-through (IPSec and PPTP).
•
Support DoS attack protection
•
Support MAC Access Control List
•
Support user Black List
•
Allow MAC address and user identity binding for local user
authentication
AP Management
•
Support IEEE 802.11b/g AP (EW-7206APg).
•
Provide centralized management via HTTP/SNMP interface.
•
Discover APs automatically.
•
Add and delete APs directly from the device list.
•
Enable or disable APs easily via management interface.
•
Provide MAC Access Control List for each AP.
•
Maintain configuration profiles of APs via local terminal.
•
Upgrade and restore AP's firmware via one single
management interface.
•
Monitor AP's system status and associated client stations.
•
Recover APs automatically when the system fails.
•
Provide alarms and warnings of APs' system status when
necessary.
•
Detect third-party APs via Monitor IP feature.
Monitoring and Reporting
•
Monitor online users' status.
•
Monitor network devices by IPs.
•
Alert WAN connection failure.
•
Support Syslog for diagnosing and troubleshooting.
•
Provide user network traffic history.