Page 1
Owner's Manual 2.5 Gallon Turf Foam Marker Model AA25GFM Manufactured for PaulB Wholesale A Paul B Zimmerman Inc. Company 1-855-738-1117 | PaulBWholesale.com Form: AA25GFMOM Rev. A Date 12/16...
™ Accu-Ag would like to thank you for choosing to purchase our model AA25GFM turf foam marker system. We appreciate your business and want to personally fill all of your equipment and sprayer needs. We also desire to provide you with the technical support and needed parts that will allow you to continue using your turf foam marker without disruption.
Safety Precautions General Guidelines Every year many unnecessary accidents occur due to improper equipment handling and a disregard for safety precautions. You, the operator, can avoid accidents by observing the precautions listed in this section. • The operator should be a responsible adult. Do not allow persons to operate the turf foam marker until they Warning have displayed a thorough understanding of turf foam...
Mounting the Turf Foam Marker Turf Foam Marker Unit ™ If mounting the turf foam marker on a Accu-Ag sprayer, place it on the center of the boom frame (Figure 2). Attach the turf foam marker by using the included 3/8” carriage bolts to clamp the turf foam marker frame around the main boom tube.
Mounting the Turf Foam Marker Discharge Tubes The discharge tubes (a) dispense the foam and should be mounted in the desired foaming position. Generally, they are mounted at the end of a sprayer boom (b) (Figure 4). If you are mounting the tubes on a sprayer, a nozzle body to compressor clamp (c) can be used.
Operating Instructions Before operating the turf foam marker, it is important that you read this entire manual and know all safety precautions. It is also recommended that you do a thorough inspection of the turf foam marker before operation. Prior to use, ensure that all hoses are attached and undamaged and that the wiring harnesses are properly plugged together and connected to an adequate power source.
Maintenance Instructions It is very important to perform maintenance on your turf foam marker before and after each use and at the end of each season of use. Proper maintenance practices will help to guard against any breakdowns and allow for maximum performance. Routine Maintenance It is highly recommended that you perform routine maintenance on your turf foam marker before and after each use.
Maintenance Instructions Winterizing your Turf Foam Marker It is essential that you winterize your turf foam marker to avoid damage and to allow for optimal performance. The winterization process should be undertaken before freezing conditions and/or after each season of use. Failure to winterize your turf foam marker will void the manufacturer's warranty.
Breakdowns & Parts Lists AA25GFM Parts List Ref # Qty. Part Number Description F2501 Turf foam marker frame, 2.5 gallon CM40 ** Air compressor, 12 volt BF1210 Boom mounting clip N232884 J-bolt, 1/4" x 2 5/16" F2503 2.5 gallon white foam marker tank (Includes item #17) FN14 Flange nut, 1/4"...
™ Accu-Ag Limited Warranty Turf Foam Marker: Model AA25GFM Warranty Coverage ™ ™ Accu-Ag hereby provides a Limited One (1) Year Warranty on Turf Foam Markers, manufactured by Accu-Ag . Turf Foam Markers ™ manufactured by Accu-Ag are warranted against any manufacturer’s defects in any of the turf foam marker’s components in the 12 months following the original date of purchase.