Huawei ETS2256 User Manual page 34

Table of Contents

Advertisement

4 Installation Description
Installing Indoor Antenna
In an area where signals can be transmitted and received with good quality, you
can install an indoor antenna, as shown in Figure 4-6.
Figure 4-6 Installing an indoor antenna for the FWT
1. Make sure to place the switch of the FWT in the OFF position.
2. Align the indoor antenna with the antenna port on the FWT host in the
direction shown in Figure 4-6, and then screw the antenna, ensuring that the
connection is secure.
Note:
For the usage and installation of antenna, please consult the vendor or
carrier.
Viewing the receive signal strength
The FWT provides you with the function of measuring the receive signal strength,
specifically as follows:
1. Searching the signal
Power on the FWT. Wait for a while, until the received signal strength
indicator appears or the dialing tone can be heard after you pick up the
handset. Five minutes later, if there is no signal indicator or the dialing tone,
please adjust the direction of the antenna. If the antenna is moved around
o
360
and there is still no signal indicator, it indicates that the signal condition
is really bad. Move the antenna to the direction where the dialing tone can be
heard after you pick up the handset.
26
HUAWEI

Advertisement

Table of Contents
loading

Table of Contents