User Interface Setup
You can setup user interface parameters.
1
Press the [FNC] button.
h Popup menu appears.
h
2
Touch [
].
h HOME screen appears.
h
3
Touch [
].
h SETUP screen appears.
h
4
Touch [User Interface].
h User Interface screen appears.
h
5
Set each parameter as follows.
[Steering Remote Controller]
■
Sets the desired function in the steering
remote controller. See Learning function of
steering remote (P.54).
■
[Beep]
Turn the key touch tone on or off.
Default is "ON".
[Information Window SETUP]
■
Set up the Information window displayed on
the HOME screen. (P.16)
[Monitor Touch Control Effect]
■
Determine whether to show the trace of
finger under monitor touch control. (P.10)
"ON" (Default)/ "OFF"
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
Adjust the sensing position of the touch
panel. (P.54)
[Time Format]
■
Select the time display format.
"12-Hour" (Default)/ "24-Hour"
■
[Clock]
[RDS-SYNC] (Default): Synchronizes the clock
time with the RDS.
[Manual]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.53)
[DISP Key]
■
Select the source screen displayed when
in the popup menu screen is pressed.
[OFF]: Displays the control screen of the
current source.
[Mirroring] (Default): Switches to the App
screen from the connected iPhone/
Android device or to the Apple CarPlay
screen from the connected iPhone when
the button is pressed. (P.23)
NAV: Switches to the navigation screen from
the connected navigation unit by pressing
the button. (P.39)
(outside oceania area)
Ñ
Adjust the date and time
manually
1
Touch [Clock] on the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] on the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] on the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch [Set].
Setup
53
English