Disconnecting Your Dishwasher - EdgeStar DWP60ES Owner's Manual

5

Disconnecting your Dishwasher

• Close the hot water supply at the faucet.
• Disconnect the power supply cord.
• Remember to release the water pressure inside the inlet hose.
The inlet hose is pressured when the water supply line is opened, even
if closed immediately.
To release pressure: press and hold the red pressure relief button on
the quick-connect assembly until the flow of water stops.
• Disconnect the quick-connect hose assembly by pulling down on the
outer locking collar, thus releasing it from the faucet adapter.
FAILURE TO RELIEVE WATER PRESSURE, BEFORE
DISCONNECTING THE QUICK-CONNECT ASSEMBLY FROM THE
FAUCET MAY RESULT IN BACK-PRESSURE OVER-SPRAY.
THE TEMPERATURE OF INCOMING WATER CAN BE VERY HOT.
BACK-PRESSURE OVER-SPRAY COULD CAUSE SEVERE BURNS
AND/OR SCALDING.
DO NOT LET CHILDREN DISCONNECT THE DISHWASHER. CLOSE
SUPERVISION OF CHILDREN IS ALWAYS IMPORTANT AROUND
APPLIANCES.