High Beam; High Beam Assist - Vauxhall MOVANO Owner's Manual

When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights (where fitted) and headlights,
depending on the lighting conditions.
For reasons of safety, the light switch
should always remain in the AUTO
position.
Daytime running lights 3 113.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wiper has been
activated for several wipes.

High beam

To change between low and high
beam, push or pull stalk until a click is
felt.

High beam assist

This feature automatically activates
the high beam at night when vehicle
speed is faster than 28 mph.
Lighting
It switches automatically back to low
beam when:
● The camera in the windscreen
detects the lights of oncoming or
preceding vehicles.
● It is foggy or snowy.
● Driving in urban areas.
If there are no restrictions detected,
the system switches back to high
beam.
Activation
Turn the outer light switch to AUTO
then pull the stalk to activate high
beam assist.
111