Edge DiskGO! Digital Music Player User Manual page 4

A -- B CLIPPING
A-B Clipping allows you to select a part of a song for repeated playback. Once the Player is in playback mode,
press the OP button to trigger the A – B clipping function and set the start point. Press it again to set the end
point. The clipping will start playing automatically. Press the OP button to cancel A—B clipping and resume
normal playback.
NOTE: You can only clip the content within a single music file.
EQUALIZER
Press the REC/EQ button to select the next equalizer mode for music playback. Selection cycle is in the
following sequence:
HOLD KEY
Slide the Hold switch to "hold" position to lock all the above buttons.
HOW TO RECORD / LISTEN TO DVR FILES
DVR (Digital Voice Recording) files are audio files created by recording voice or audio with the
built-in microphone or by recording FM transmissions.
TO POWER ON
Press the button to turn on the player. Press the MODE button to switch into voice mode (the
display will display the .WAV file name). When there are existent .WAV format files in on-board flash memory,
track number 01 and file name (VXXX. wav) will both be displayed on the LCD screen. If there are no files
stored, track number 00 will be displayed.
PLAYING STORED FILES
While the player is in voice mode, but not operating (idle), pressing the button will start playback.
RECORD
When the player has been changed to voice mode, press the REC/EQ button to trigger live recording. Press it
again to terminate recording.
HOW TO USE THE FM TUNER
1. OPERATING KEYS FOR FM FUNCTION