Pioneer Elite VSX-LX302 Basic Manual page 61

> Specifications > Advanced Setup
Setting Item Default Value
Surround Left 0 dB
Subwoofer 0 dB
• The result may not be as expected depending on the input source and listening mode setting.
• If you want to make the adjustments while listening to something, press
and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual EQ Select" first.
28
> Listening Modes
Setting Details
After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from
between "31 Hz" and "250 Hz" with the cursors
/ , adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with / .
• This cannot be selected if "No" is set in
"System Setup" - "Speaker" - "Configuration" -
"Subwoofer".
on the remote controller,
> Network Functions
MCACC Data Check
You can check the number of speaker channels connected and the content and values you
have set for each of the speaker settings.
■ Speaker Setting
You can check the number of speaker channels connected and the large and small settings
you have set for the low range reproduction capabilities for each of the speakers.
■ Channel Level
You can check the output level settings for each of the speakers.
■ Speaker Distance
You can check the distance from each speaker to the listening position.
■ Acoustic Calibration EQ
You can check the calibration values for the frequency characteristics of each speaker that
were set in "Manual MCACC".
> Basic Manual
Troubleshooting Supplementary Information, etc� |