SM200 GPS / GSM Smartphone Tracking & Security Cellphone function table: Remote Buttons Key Conditions command Press and hold 1 Arm K1 sec Press and hold 1 Disarm K2 sec Press and hold 1 Status K3 sec Press and hold 1 Location K4 sec Press and hold 1 Engine / Start K5 sec Press and hold 1 Engine / Stop K6 sec Home K7 ...
Device_Name: User can use this parameter to assign a preferred name for the unit and it will appear on each SMS report. The maximum length is 10 characters, which can be a mix of numbers and the English alphabet. Symbols like $,%,@, or ~, etc must be avoided. Remote_Starter_Timer User can use this parameter to set up the operation time for the “Remote_Start_Engine” function. There are 3 options: 5 minutes, 15 minutes, or 30 minutes. The setting would be 5, 15, or 30. Note: If unit receives the invalid value then it will return #ERR*CFG:2# Confirm: Setting SM200 Confirm is Calling or SMS Mode. 2) If the SMS message setting is successful, the sender will receive an SMS confirmation message from unit as below: #OK: *CFG*New_Password*Celluler_Phone_Number1* Celluler_Phone_Number2* Celluler_Phone_Number3*Time_ Zone Setting* Device_Name*Remote_Starter_Timer*Confirm# Save Configurarion: Save CAR 1 / 2 / 3 setting configurarion . not resend SMS to SM200 unit . 7. Alert Press button , view the system all trigger list. If SM‐200 main unit trigger SM‐200 will send trigger SMS and call back cellphone 15 sec and hung up. Confirm: CALL Mode : when SM200 has being trigger, SM200 will send a Trigger SMS to the 14 of 38 ...
SM200 Wiring Diagram SM200 Wiring Diagram GSM LED GSM antenna SOS button DIP Switch To option external VH 720 engine starter k it Defualt All SW OF F Dataport selection : Smartphone M ode Dataport (Smartphone or CANBUS port selectable )
Need help?
Do you have a question about the SM200 and is the answer not in the manual?
Questions and answers