1. Manuals
  2. Brands
  3. i-Vac Manuals
  4. Steam Cleaner
  5. SM-10
  6. Manual

i-Vac SM-10 Manual

Pure fresh steam mop
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Pure Fresh Steam Mop
Lightweight design
Ready In 30 Seconds
1200W Powerful Steam

Advertisement

Table of Contents
loading

Related Manuals for i-Vac SM-10

Summary of Contents for i-Vac SM-10

  • Page 1 Pure Fresh Steam Mop Lightweight design Ready In 30 Seconds 1200W Powerful Steam...

  • Page 3: Specifications

    SM-10 Congratulations on the purchase of your new i-Vac Steam Mop. There are many useful features built into your steam mop. We recommend that you carefully read this instruction manual so you can make the most of all the features this machine has to offer.

  • Page 4: Before You Begin

    Before You Begin Please read this manual before operating cleaner This will ensure you obtain full benefit from your new steam mop. Keep this Instruction Manual in a handy place for future reference. Important Always switch the cleaner off and remove the plug from the electricity supply before cleaning your appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected to an AC supply at the voltage shown on the rating plate.
  • Page 5 WARNING! To reduce the risk of fire, electric shock or injury when using an electrical appliance, basic precautions should always be followed, including the following: This appliance is not intended for use by 10. Never overfill the tank / boiler. Overfilling persons (including children) with reduced may result in a possible electrical shock, physical, sensory or mental capabilities or lack emission of boiling water; scalding and steam of experience and knowledge, unless they generation may be affected.
  • Page 6 DANGER: 24. Always store the appliance indoors in a cool and dry place. This appliance is for use on nominal 220-240VAC circuit. 25. For appliances without solution tank, do not add Make sure the appliance is connected to an outlet with cleaning solutions, scented perfumes, oils or any the same configuration as the plug. No adapter should other chemicals to the appliance, as cleaning be used with this appliance.
  • Page 7 Assembly IMPORTANT! The appliance should be disconnected from the power supply before you start to assemble. Insert the handle into the main body until it locks into position. Attach the mop pad onto the base of the mop head.
  • Page 8 Instructions For Use WARNING! Do not add any cleaning solution, detergent, vinegar or bleach into the water tank. This will cause damage to the steam mop. Do not use hot or boiling water to fill the water tank. Only refill the water tank with cold tap water.
  • Page 9 Turn on the power switch, the steam mop will be in standby mode and is ready to use. Note: Upon initial use, please allow the water to flow through the system for approximately 30 seconds to prime the unit. To select the steam mode, continue to press the steam control button for Low steam mode (Light Cleaning), Medium steam (regular cleaning), or High steam (Deep cleaning heavy traffic areas).
  • Page 10 Steam Cleaning Sealed Hard Floors NOTE: Before using the steam mop, sweep or vacuum the floor to remove any loose dirt or debris. IMPORTANT: Do not use the cleaner without a mop pad attached to the mop head. WARNING: Hard floor wax may be removed by the heat and steam action. Do not use the cleaner on unsealed wood floors or operate the cleaner in a stationary position for an extended period of time.
  • Page 11 Steam Cleaning Carpets NOTE: Before using the steam mop, vacuum the floor to remove any loose dirt or debris. IMPORTANT: Do not use the cleaner without a mop pad and carpet glider attached to the mop head. Place the cleaner onto the carpet glider. Plug the cleaner into the power supply.

  • Page 12: Maintenance

    Maintenance WARNING! The cleaner should be in the fixed position and disconnected from the power supply before performing any maintenance tasks. IMPORTANT: Always ensure that cleaner has cooled before performing any maintenance tasks. Emptying the Water Tank 1. Unplug the cable and and place the steam mop in upright position. Let it cool for 3-5 minutes. Empty water tank before storing.
  • Page 13 Removing and cleaning the Mop Pad Let machine cool down for 3-5 minutes. Carefully remove the pad from mop head. Wash the mop pad in a washing machine with a mild detergent at a max temperature of 40°C. IMPORTANT: Do not use bleach or fabric softener when washing the mop pad.

  • Page 14: Troubleshooting

    Troubleshooting Problems and Solutions If you come across a problem, please use this checklist before contacting Godfreys Customer Care on 1800 815 270 (AUS) or 0800 282 288 (NZ). Fault Solution The steamer will not switch - Check the steamer is plugged in - Plug the steamer to different socket The steamer will not - Check there is enough water in the clean water tank produce the steam.

  • Page 15: Spare Parts

    Spare Parts Part Part Number Steam Mop Pad 31400300 Carpet Glider 31155608...

  • Page 16: Steam Mop

    SM-10 Steam Mop Conditions of warranty Your i-Vac Steam Mop, in the case of domestic use, has a of non-genuine parts. If any part is no longer available or one year parts and labour warranty against product defects manufactured, Electrical Home-Aids Pty. Limited will replace and failures when the product is used in accordance with the it with a genuine functional replacement part.

Table of Contents