Advertisement
Quick Links
What your pole package contains:
1 Xtreme Pole (18, 22, 25, 35 or 47)
1 Gooseneck
1 Hose Pack & Connector
1 Brush of choice
To assemble your pole ready for use:
Remove any packaging and carriage straps.
Slide the end of pole hose with red connector up though the base of the
Xtreme pole and push through until it appears out the top of the pole.
Connect the pole hose connector to the gooseneck stem (or gooseneck
hose) — push firmly on.
Open the top clamp and slide the gooseneck fully into the top section. Close
the top clamp lever (adjust if needed) so that it firmly holds the gooseneck in
position.
Connect the pole hose connector to your hose reel and the pole is ready for
work.
Advertisement
Summary of Contents for Gardiner SUPER-LITE XTREME
- Page 1 What your pole package contains: 1 Xtreme Pole (18, 22, 25, 35 or 47) 1 Gooseneck 1 Hose Pack & Connector 1 Brush of choice To assemble your pole ready for use: Remove any packaging and carriage straps. Slide the end of pole hose with red connector up though the base of the Xtreme pole and push through until it appears out the top of the pole.
- Page 2 Using the Pole with Extensions With the Xtreme range of poles there also various types of Extension sections available. The Xtreme18, 22 and 25 both have the option of an extra single extension section. The 22ft, 25ft and 35ft also have the option of a two-section Xtreme extension pack.
- Page 3 Fitting Extensions to the Xtreme44 & 47 The Xtreme44 & 47 have the option of being used with modular clamped ex- tension sections or the #10-12 triple telescopic extension pack if needed for high level work. Standard Extensions—For use up to 68ft—4 extensions maximum #10-12 Triple Telescopic Extension Pack—1 pack per pole Hi-Strength Extensions—For use up to 79.5ft—6 extensions maximum We do not recommend mixing these extension sections in use on the pole.
- Page 4 Fitting subsequent Modular sections. To do this you have two options: Fit extra extension sections by sliding the extension over the end of the pole hose (disconnect from hose reel or tap first). Slide extension on to the stepped base of the extension section above and clamp in the fully inserted position.
- Page 5 GUIDANCE When using at heights above 65ft we would recommend using an adjust- able gooseneck and soft brush. This is because at these heights the top sections of the pole will be virtually parallel to the face of the building. Although the poles feature insulated and isolating handle sections - Always check for overhead power cables before use, as carbon- fibre poles are good conductors of electricity.
-
Page 6: Warranty
Gardiner Pole Systems Ltd. A returns number (RN) will need to be issued prior to return of the item. If goods are received without a returns number, no action will be taken and the goods will be kept in storage for three months before being disposed of.