Page 1
Show- -Go Size (L x W x H) Comps. 8096 33” X 20” X 12” Drawing is representative of most models. Some variations between models may occur. WARNING Wire panels and sheetmetal parts may have sharp edges, especially when handled as loose components. Use caution when handling or performing cage assembly and maintenance.
Page 2
Show- -Go Layout and count all parts as shown in the assembly diagram. Notify Customer Service Part List immediately if any parts are missing or damage has occured during shipment. Description Description Main Panel Sub Assembly Transport Tray Door Guards Pack of Cage Clips Partitions Hardware (screw &...
Page 3
Cage clip pliers are recommended for assembly. Unfold main panel sub assembly Attach front, back and side pan- Snap door guards (B) around (A) so that each side panel meet els using cage clips (F) every edges of door opening. Re- at the corners.
Page 4
Position cage so that it sits inside tray (E) once ass- Attach flooring (D) to cage, two inch up from sembly is completed. the bottom of side panels using cage clips every two inches. Using spring hook, attach cage to secure the tray during transport.