Table Of Contents - Panasonic PT-AE100U Service Manual

LCD Projector 1
1. Safety Precautions 3
1.1. General Guidelines 3
1.2. Leakage Current Check 4
1.3. UV Precaution and UHM Lamp Precautions 4
2. Ext Option 5
2.1. Procedure to enter EXT OPTION 5
2.2. EXT OPTION Menu and Functions 5
2.3. Canceling EXT OPTION 7
3. Self-Check Mode 7
3.1. Procedure to enter the self-check mode 7
3.2. Self Check Display and Contents 7
3.3. Canceling the self-check mode 7
4. Service Mode 7
4.1. Procedure to enter the service mode 8
4.2. Canceling the service mode 8
5. Disassembly Instructions 8
5.1. Printed Circuit Board and Main Parts Location 8
5.2. Removal of Upper Case 10
5.3. Removal of A-P.C.Board 11
5.4. Removal of K-Module 11
5.5. Removal of S-P.C.Board 12
5.6. Removal of R-P.C.Board 13
5.7. Removal of B-Module 13
5.8. Removal of P-Module 14
5.9. Removal of Lamp Unit 15
5.10. Removal of Analysis Block, LCD Block and Lens Block 16
5.11. Replacement of Polarizer 17
5.12. Replacement of PBS Array (Analysis Block) 18
6. Measurement and Adjustments 20
6.1. Adjustment Procedure Flowchart 20
6.2. Cautions for Adjustment 20
6.3. Setting Before Adjustment 20
6.4. Software for Adjustment 20
6.4.1. Outline 20
6.4.2. Operating Procedure 21
6.4.3. Port Selection Menu 21
6.4.3.1. Explanation of Buttons 21
6.4.4. Data Send/Receive Menu 22
6.4.4.1. Explanation of Buttons 22
6.4.4.2. Receiving and sending of the data 23
6.4.5. Adjustment Menu 23
6.4.5.1. Explanation of Buttons 23
6.5. Flicker Adjustment 24
6.5.1. Adjustment Menu 24
6.5.2. Explanation of Buttons 25
6.5.3. Equipment to be used 26
6.5.4. Adjustment Procedure 26
6.6. Input Level Adjustment (RGB) 26
6.6.1. Adjustment Menu 26
6.6.2. Explanation of Buttons 27
I
svcdoc