Page 1
E SaniStand® Hand Sanitizer Stand Assembly Instructions SPECIFICATIONS Dimension Imperial Metric Height 52 in 132 cm Width 29.5 in 75 cm Depth 29.5 in 75 cm Weight Empty 17 lb 7.71 kg NOTE: All dimensions are subject to change due to environmental factors.
Page 2
Assembly Instructions Step 1: Insert the tabs of one panel into the slots of a second panel and slide down into place. Repeat this step for the remaining panels. Step 2: For the fi nal panel, You will need to twist the whole assembly to get the last tabs into the slots.
Page 3
Assembly Instructions Cont. Step 3: Slide the leg brace into the slots located at the bottom of the panels and insert the tabs into the corresponding slots. Pull the tab into the slots. Repeat this for the other leg brace. You will have to guide the second brace under the fi rst brace and into the slot of the side panel.
Page 4
SAN2-0003 Top Panel SAN2-0001 Side Panel PC-000105 Rivet SAN2-0002 Leg Brace SAN2 Assembly - March 2020 Page 4 of 4...
Need help?
Do you have a question about the E SaniStand and is the answer not in the manual?
Questions and answers