Troubleshooting & Warranty - Westinghouse WHT0571 User Manual

TROUBLESHOOTING & WARRANTY
BEFORE YOU CALL FOR SERVICE
IF THE APPLIANCE FAILS TO OPERATE:
A) Check to make sure that the appliance is plugged in securely. If it is not, remove
the plug from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to
be operating properly, test the outlet with another appliance.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT CUSTOMER SERVICE.
DO NOT TRY TO ADJUST OR REPAIR THE APPLIANCE YOURSELF.
CUSTOMER SERVICE
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the W
Appliance Co. Customer Satisfaction Center at 1-855-855-0294.
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
TROUBLESHOOTING
TROUBLE
Appliance does not turn on
Fan works but no heat
SPECIFICATIONS
• Voltage Rating: 120 V (60Hz)
• Power Consumption: 1500W
• Unit Dimensions (WxDxH): 6.85" x 6.2" x 18.74"
• Unit Weight: 3.75 lbs.
Page 10
POSSIBLE CAUSE
Appliance is not plugged in
Temp or power control in
wrong position
Thermal cutout protector
activated because of
overheat condition
POSSIBLE REMEDY
Check that appliance is
plugged into a working outlet
Turn controls to correct
position per manual
To reset protector, unplug fan
for several minutes and allow
to cool. Product should then
function normally