Instalation; Transporting And Unpacking - Promeba PS-182 User Manual

USER MANUAL // EMERGENCY CHAIR PS-182
Review 02/19
02

INSTALATION

02.1 Transport and unpacking
First remove the packaging carefully so as not to dama-
ge the outside of the stretcher.
1. Transport
· Always fix the load, if it is necessary stack. you should
follow the diagram shown.
· Transport the level load and following all the precepts
and regulations regarding the transport of loads.
2. Unpacking
· Put the box on a flat and stable surface, open the seal
carefully not to damage inside.
· Remove the product from the inside of the case as
shown in the chart below.
Each product has been thoroughly inspected when
leaving the factory. To ensure that the transport has not
deteriorated it, please inspect the exterior and interior
carefully, and in the event of any damage, contact the
installer immediately.
PACKING UNIT
RESPECT THE PACKAGING TRANSPORT POSITION
UNPACKING THE PRODUCT
ALWAYS USE FLAT SURFACE
7