Making Ice; Draining; Water Filter - GE OPAL01GEPSS Owner's Manual

Making Ice with Opal
Once Opal has been cleaned/sanitised, move the ice maker to its desired location and complete the following steps.
2. Fill reservoir with potable (safe to drink) water up to
water is misuse and will void your warranty.
3. Plug the ice maker into a grounded outlet.
4. Touch the display button to start the ice maker. The
display will flash green to indicate the ice maker is
ON, then transition to the falling white display.
continue to make ice until the bin is full, or it runs out
of water. To continue making ice, just add more water.
Draining Opal
2. You turn it off for more than a few days. (i.e. vacation)

Water Filter

The Opal Water Filter, is available at GEAppliances
and is the only water filter compatible with Opal. Please
follow the installation instructions included with your filter.
49-1000418 Rev. 8
3. You are not using much ice. Continous recirculation
of meltwater may affect taste. For best results, drain
your Opal.
NOTE:
reinstall the screened intake cap prior to cleaning your
Opal.
Water Filter
11