Page 2
Functional description The PowerFLAG Shutdown adaptor connects to a IMV VICTRON UPS and to a computer via a serial RS232 port. The Shutdown adaptor supervises the alarm contacts provided by the UPS and converts the contact status into the PowerFLAG CP4 protocol.
Page 3
Damages caused by incorrect connection of the device are not covered by this warranty. Support First line support is done by your local Victron / IMV distributor, please contact them for any problems with installation or use. Second line support is done by Victron / IMV Software Department to be reached by:...
Page 4
Internet it's the fastest and cheapest way to get your files.We have the WWW server running at www.victron.nl, with your favourite WEB browser you can access the latest files but also all the information pages from Victron / IMV. Inquiries and suggestions For any inquiries about the product or suggested improvements you may also use the above addresses.
Schläfer & Hellmich GmbH Koellestrasse 30b D-76189 Karlsruhe, herewith declares that the product PowerFLAG Shutdown adaptor, to which this declaration relates, is in conformity with the following standards. EN55022 : 1994 (05/95) EN50082 : 1995 (02/96) under consideration of the EMV-guideline 89 / 336 / EWG EN60950 Karlsruhe, 14.08.2000...
Page 6
Fax: E-Mail: E-Mail: Victron / IMV Software Product name (Wiz-Kit / PowerFLAG / ...) : Version number (4.05 / 4.01 / ...) Serial number (none / 50000023 / ...) Date of purchase / delivery (1-may-95 / ...): Bought from (...) Computer where the software is running on Brand (HP / IBM / ...)