Hitachi 50HAK6150U Instruction Manual page 13

later using the Settings>Device Preferences>Usage
& Diagnostics menu on the Home Screen.
Information on Google services and some features of
your TV will be displayed next. You can turn on person-
al results for Assistant by choosing the related option
when prompted. Press OK consecutively to proceed.
8. Country
In the next step select your Country from the list and
press OK to continue.
9. Password
Depending on the country selection you made in the
previous step you may be asked to define a password
(PIN) at this point. Press OK to proceed. The selected
PIN cannot be 0000. This PIN will be required in order
to access some menus, contents or to release locked
channels, sources etc. You will have to enter it if you
are asked to enter a PIN for any menu operation later.
10. Select TV Mode
In the following step of the initial setup, you can set
the TV's operation mode either as Home or as Store.
Store option will configure your TV's settings for store
environment. This option is intended only for store
use. It is recommended to select Home for home use.
11. Chromecast built-in always available
Select your chromecast availability preference. If set as
On your TV will be detected as a Google Cast device
and allow Google Assistant and other services to wake
your TV up to respond to Cast commands, even when
on standby mode and the screen is off.
12. Tuner Mode
Note: If you don't want to perform a tuner scan, select one of
the available options anyway. You can skip the scan at some
later stage of the installation wizard. If you skip this step you
can perform a channel search later using the related Channels
menu options.
The next step is the selection of the tuner mode.
Select your tuner preference to install channels for
Live TV function. Antenna and Cable options are
available. Highlight the option that corresponds to
your environment and press OK or Right directional
button to proceed.
Antenna
If Antenna option is selected, the TV will search
for digital terrestrial broadcasts. On the next screen
highlight Scan option and press OK to start the search
or select Skip Scan to continue without performing
a search.
Cable
If Cable option is selected, the TV will search for
digital cable broadcasts. If any, available operator
options will be listed on the Select Operator screen.
Otherwise this step will be skipped. You can select
only one operator from the list. Highlight the desired
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
operator and press OK or the Right directional button
to proceed. On the next screen select Scan option
to start a search or select Skip Scan to continue
without performing a search. If Scan is selected a
configuration screen will be displayed next. Scan
Mode, Frequency(KHz), Modulation, Symbol
Rate(Ksym/s), Network ID options may need to be
set. To perform a full scan set the Scan Mode as
Full/Advance if available. Depending on the selected
operator and/or Scan Mode some options may not be
available to be set.
Once you are done with setting available options,
press the Right directional button to proceed. The TV
will start to search available broadcasts.
When the initial setup is completed "Complete"
message will be displayed. Press OK to finish the
setup.
Next, you will need to agree to the terms and conditions
of Freeview Play to make use of the related services.
Scroll the page to read the entire text using the up/
down directional buttons. Highlight Accept and press
OK on the remote to confirm and proceed. Highlight
Skip and press OK to proceed without confirmation.
For further requirements for Freeview Play services
refer to the Freeview Play Platform section.
Depending on the country selection you made in the
earlier steps of the setup a disclaimer of liability may
be displayed on the screen instead of the terms and
conditions of Freeview Play. You can use Up and Down
directional buttons to scroll through and read the entire
text. Highlight Accept and press OK to proceed.
Home Screen will be displayed. You can highlight Live
TV app and press OK to switch to Live TV mode and
watch TV channels.
Home Screen
To enjoy the benefits of your Android TV, your TV must
be connected to the Internet. Connect the TV to a
home network with a high-speed Internet connection.
You can connect your TV wirelessly or wired to your
modem/router. Refer to the Network & Internet
and Connecting to the Internet sections for further
information on how to connect your TV to the internet.
The Home menu is the centre of your TV. Press the
Home button to display Home Screen. From the
Home menu you can start any application, switch to a
TV channel, watch a movie or switch to a connected
device. Depending on your TV setup and your country
selection in the initial setup the Home menu may
contain different items.
The available options of the Home Screen are posi-
tioned in rows. To navigate through the Home Screen
options use the directional buttons on the remote.
Apps, YouTube, Google Play Movies & TV, Google
English - 12 -