Table of Contents
Advertisement
Operating the appliance
en
Do not use the measuring aid for
Note:
gel detergents and washing powder, or
for programmes with prewash or when
"Ready in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Select the Start/Pause A button. The
indicator lamp lights up and the
programme starts.
During the programme status indicators
show programme progress (programme
sequence).
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press Start/Pause A .
1.
Select the other programme.
2.
Press Start/Pause A . The new
3.
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
Press Start/Pause A .
1.
To cool the laundry: Select O Rinse.
2.
Press Start/Pause A .
3.
For programmes at low temperatures:
Press Start/Pause A .
1.
Select 0 Spin or Drain [ .
2.
Press Start/Pause A .
3.
Programme end
Indicator lamp 0 for f flashes and the
Start/Pause A button indicator lamp is
off.
18
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Set the programme selector to off
2.
position. The appliance is switched
off.
Turn off the water tap.
3.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
If the display panel goes off at the
■
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.
Advertisement
Table of Contents
