Power Cooker PC-WAL2 Quick Start Manual page 2

Digital Control Panel — Overview
The Power Cooker has up to eight basic cooking modes that
may be used alone or in combination to produce an infinite
variety of results. The Quick Start Guide supplied with this
unit provides Step-By-Step instructions.
1
0000
2
3
4
5
WHEN THE UNIT IS FIRST PLUGGED IN, 0000 will appear on the LED
Display. When a cooking process is selected, such as COOK, the default
time will blink 5 times. Then rotating double zeros may appear on the left
side of the screen to signify it is building pressure. Once pressure is built,
the zeros will stop rotating and begin counting down the time. It will beep,
the LED Display will be blank, and enter KEEP WARM mode once the time
has expired until cancelled.
NOTE: go to page 10 of the manual for complete control information.
6
MODE
1
2
3
7
4
8
5
9
6
10
7
8
9
10
DEFAULT TIME PRESSURE (kPa)
15 minutes 70
6 hours --
30 minutes 70
10 minutes 80
10 minutes 70
20 minutes --
10 minutes 20
12 minutes 30
15 minutes 40
18 minutes 50
20 minutes 60
25 minutes 70
30 minutes 80
COOK TIME Button — You can change the Default Time when pressing the
button.
DELAY TIME Button — Your meal will cook at a later time pressing the
button from 30 minutes to 24 hours in 30-minute increments.
KEEP WARM / CANCEL Button — While the unit is in a cooking cycle pressing
the button will stop the cooking cycle.
COOK TIME RANGE
1 2
1 – 30 minutes
1 – 12 hours
1 – 50 minutes
1 – 120 minutes
1 – 30 minutes
1 – 20 minutes
10 – 60 minutes
12 – 60 minutes
15 – 60 minutes
18 – 60 minutes
20 – 60 minutes
25 – 60 minutes
30 – 60 minutes