Related Manuals for Peak Performance PKC0H1
Summary of Contents for Peak Performance PKC0H1
- Page 1 12-Volt Heater / Defroster Model No.: PKC0H1 Owner’s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner’s Manual for future reference. © 2017 4/17...
- Page 2 CONTENTS SAFETY PRECAUTIONS ........................ 2 General Safety Messages ....................... 2 INTRODUCTION ..........................4 FEATURES ............................4 POWER CONNECTION ........................5 OPERATION ............................ 5 MOUNT INSTALLATION ........................6 Mount Installation Precautions ....................6 Semi-Permanent Installation ....................6 Permanent Installation ......................6 CARE AND MAINTENANCE ......................
- Page 3 • Never operate the Heater/Defroster around water or areas of high moisture. • Never submerge the Heater/Defroster in water or any liquid. Fire / Explosion Hazards • Only connect the Heater/Defroster to an approved 12-volt accessory socket rated at 15 amps or higher.
- Page 4 INTRODUCTION Read and understand this Instruction Manual and your vehicle Owner’s Manual (when applicable) before using the Heater/Defroster. Operate the Heater/Defroster only as described in this Instruction Manual. FEATURES Legend Heat Outlet Vent Air Inlet Vent/Fan HEAT – Red LED Indicator FAN –...
- Page 5 POWER CONNECTION The 12-volt DC adapter allows the use of a 12-volt accessory socket to power the Heater/Defroster. The Heater/Defroster unit contains a 15-amp blade type fuse to prevent damage from excessive current while operating. Only use the 12-volt DC adapter that is provided with this Heater/Defroster. Use of other adapters may void any warranty, cause Heater/Defroster damage, increase risk of fire and/or result in personal injury.
- Page 6 MOUNT INSTALLATION The Heater/Defroster may be mounted to any solid surface, such as a vehicle dashboard or console, using the Velcro tape or the provided mounting screws. Mount Installation Precautions • N ever mount the Heater/Defroster near flammable materials. • N ever mount the Heater/Defroster where it may be exposed to fire, direct flame or high-heat sources. • Never mount the Heater/Defroster where the air inlet vent/fan or heat outlet vent may be blocked. • Always mount the Heater/Defroster in a well-ventilated area.
- Page 7 CARE AND MAINTENANCE FIRE HAZARD Do not use combustible cleaners to clean the Heater/Defroster. ELECTRIC SHOCK HAZARD Always disconnect the Heater/Defroster from its power source before cleaning. BURN HAZARD Allow the Heater/Defroster to cool completely before cleaning. • Unplug the Heater/Defroster 12-volt DC adapter power plug from the power supply and allow the Heater/Defroster to cool before attempting to clean.
- Page 8 LIMITED WARRANTY Manufacturer warrants to the original consumer, or purchaser, that the PEAK® PKC0H1 12-Volt Heater/Defroster will be free from defects in material and workmanship for one year from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other warranties, expressed or implied, beyond those warranties specified above. Manufacturer excludes any...
Need help?
Do you have a question about the PKC0H1 and is the answer not in the manual?
Questions and answers