Appendix 1 Installation Check List - ABB AMXE132 Manual

31
WAsTE dIsPosAl And rECyClIng
Appendix 1 Installation check list
Installation date Motor serial number
YES NA
General
Has the manual been read and understood?
Has the motor been stored according to what is described in the manual?
Are suitable and correct personal safety equipment available?
Are appropriate lifting eye bolts available?
Mechanical installation
Are the concentricity and perpendicular tolerances for the mating shaft and flange fulfilled?
Are the requirements for the mating surfaces for side support mounting fulfilled?
Have all bolts been tightened with the correct tighten torque?
Has thread locking been applied to the bolts?
Has the spline been lubricated with a suitable molybdenum disulfide grease?
Liquid cooling system installation
Are recommended mating cooling connectors used?
Is a recommended coolant used?
Are the requirements of the liquid cooling system according to the separate rating plate fulfilled?
Electrical installation
Is the mating HV power connector the correct type?
Is the motor properly grounded?
Are all cable connections installed in an appropriate way and suitable for high frequency currents?
Is the mating LV connector the correct type?