Ebelco DH1224L-110 Installation Instruction

Electromagnetic Door Holder (Mounting Stand)
Floor Mounting
Wall Surface Mounting Wall Surface Mounting
User Manual User Manual

Application:

Fire Door or Escape Door

Normal Operation Method:

To ensure the door is held properly by the door holder,
the door with armature must be pressed slightly against it.

During Emergency

a. Security system will automatically cut off the
powersupply to the door holder or ;
b. Press the red button to release the door.

Testing

Manually press the red button on the top of the door holder to
ensure the automatic door closing mechanism is working.
Releasing the red button will recover the holding function.

Current Rating

12 Volt - 100 mA
24 Volt - 50mA
DH-1224L (12/24 Volt)
Installation Instruction

Connections

Terminal - Max 2.00mm wire cable
12 VDC 24 VDC

Setting

Setting
To Door
Holder
Release
Button
IMPORTANT!
Set the jumper position according to the
power input correctly before switch ON
the power.
EBELCO
12 / 24 VDC
Power Input