Table of Contents
Advertisement
2.3. HARDWARE INSTALLATION
1.
Shut down the computer.
2.
Unplug monitor cable from your computer.
3.
Remove your computer' s unit cover, and ground yourself.
4.
Remove the screw and slot bracket from the board' s mounting.
M
Be sure removing the existing graphics card from your system, if you
have another graphics card in your system.
5.
Pick up the GA-660Plus and remove the plastic sleeve.
6.
Press the card firmly into the AGP slot.
M
Be sure the metal contacts on the card are indeed seated in the slot.
7.
Replace the screw to secure the slot bracket of the GA-660Plus.
8.
Replace your computer' s unit cover.
9.
Plug your monitor' s 15-pin connector into your GA-660Plus monitor
connector.
10. Turn on the power.
11. You can install the driver and utility to your system now.
Hardware Installation
2-3
Advertisement
Table of Contents
