Advertisement
DSR-6100 Required RF Connections
Connect both RF Input Signals:
—> Port 3: Galaxy 14 C-Band Horizontal LNB RF
—> Port 4: Galaxy 14 C-Band Vertical LNB RF
PLEASE NOTE: Programming for these ESPN services can come from either port at any given time.
Installers must connect and test both RF input ports 3 and 4 for signal lock. (Front Panel Step 2)
DSR-6100 Front Panel Programming
Connect to AC power. The unit takes about 90 seconds to boot up.
During the boot up process, this Model/Version
screen will appear for a few seconds and will be
replaced by the Main/DSR-6100 menu screen:
Front Panel Step 1: Display and Record the U/A Number.
Starting on this main "DSR-6100" menu, use the ◄ ► arrow buttons to navigate to
"Diag" and press ENTER.
Once this "DIAGNOSTIC
arrow button once, to access the Unit Address.
Record the Unit Address number for each receiver:
ESPN
ESPN2
ESPNEWS 000 - _________ - _________ -
ESPNU
→
Menus" screen appears, press the ▼
000 - _________ - _________ -
000 - _________ - _________ -
000 - _________ - _________ -
3
Advertisement
