Product Overview - Toro Power Max 1028LE Operator's Manual

Product Overview

3
4
2
1
5
6
10
11
1. Auger/impeller lever
2. Speed selector lever
3. Quick Stick discharge
chute control
4. Traction lever
5. Headlight
6. Fuel tank
4
1
2
3
1. Ignition switch
2. Choke
3. Throttle
7
8
9
13
12
m-7018
7. Engine oil fill tube/ dipstick
8. Chute deflector
9. Discharge chute
10. Fuel shutoff valve
11. Skid (2)
12. Auger
13. Scraper
5
6
4. Primer
5. Electric starter
6. Recoil starter
3329-776 Rev A
6
Setup
Installing the Upper Handle
Assembly
1. Lift and rotate the upper handle assembly and
position it over the lower handle.
Note: Ensure that the 2 cables attached to the
Quick Stick are routed inside the upper handle
legs and that the 2 lever cables and the wire for
the headlight are not pinched between the handle
sections.
2. Secure the upper handle assembly with 4 handle
bolts, 4 curved spacers, and 4 locknuts from the
loose parts bag.
m-6964