Quoizel QR3330 Installation Manual

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
CAUTION
• For your safety, read instructions completely before beginning installation.
• Quoizel recommends 2 people for each step during assembly.
TOOLS REQUIRED
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
PACKAGE CONTENTS
Mirror
A
x 1
NOTE: There are two options (Templates or Measurement) for identifying correct locations for Nails.
OPTION A
Mark Nail Locations
On The Wall At
Arrow Locations
8.75"
2.25" 19.5"
TEMPLATE
VERTICAL
INSTALLATION GUIDE FOR
QR3330, QR3331, QR3332 and QR5366
Mark Nail Locations
On The Wall At
8.75"
Arrow Locations
4.75"
2.25"
2" 31.75"
TEMPLATE
HORIZONTAL
MOUNTING HARDWARE
Mirror Hanger
AA
x 2
Hanger Nail
BB
x 4
Option A
the Mirror Hangers By Using Template
The template included with package is provided
to assist you in placing the mirror in the location
you desire. The template is a full size drawing of
your mirror and includes hanger mounting
locations that your mirror maybe hung.
Place the template on the wall in the location you
4.75"
have selected for your mirror. Once you have the
template in the location you desire and making
sure it is level you may tape or pin the template to
the wall. Now you may mark the holes for the
mounting hardware as indicated on your
2"
template. You may mark the mounting hardware
location by either using a pin and pushing it
through the template leaving a small hole on the
wall. Or you may use a pencil and place a mark
on the wall through a small hole you cut into the
template at the correct mounting location.
Remove the template from the wall and install the
Mirror Hangers as described in Step 1.
- 1 of 2 -
Released Date: 2021-10-11
-
Identify Nail Points for mounting