Table of Contents
Advertisement
9.4 AutoDose configuration
mode
Enter the AutoDose
configuration mode before
proceeding with any
programme setting. The
configuration mode may
cancel temporary settings .
1. Press the Zap./Vyp. button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Teplota
Odstřeďování
simultaneously for a few seconds
until the display shows the
the left in the display and blinking
detergent tank
indicators on the right in the
display.
4. Touch related tank buttons to toggle
function off and on. The display
shows OFF when a tank is disabled
or shows tank indicator when it is
enabled.
5. To set basic dosage touch related
tank buttons until default dosage
laundry product and two arrows on
bottom of display appear. Touch the
Teplota
button repeatedly to
and the
buttons
on
and softener tank
adjust the dosage upwards and the
Odstřeďování
downwards. Minimum step is 1 ml.
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the Teplota
and the Odstřeďování
again to exit immediately.
9.5 Filling the detergent and
additives on AutoDose
system
Please read "Detergents and
other treatments" in "Hints
and tips" chapter.
We recommend that you do
not exceed the maximum
indicated level (
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
ENGLISH
25
button to adjusts it
buttons
).
Advertisement
Table of Contents
