Advertisement
Table of Contents
1. PREPARE FOR SET-UP
1. Lay out wing top up and
assemble the poles.
2. Shorten / adjust guy cord to half-length
and lay out away from wing.
PACKAGE INCLUDES:
Wing, 1 center pole, 2 support poles,
6 guy cords with tensioners, 6 stakes
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
R E S T B E T TE R. P L AY B E T TE R .
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art # 82-529 EN | Printed in Taiwan
2
TRANQUILITY
SET-UP INSTRUCTIONS FOR THE
TRANQUILITY 4 AND 6 WINGS
Please follow these instructions to guide you through assembly only. For
complete instructions on the recommended care and use of your tent, watch
the videos at www.thermarest.com/tents
WING
™
Advertisement
Table of Contents
Summary of Contents for Therm-A-Rest TRANQUILITY WING
- Page 1 1. PREPARE FOR SET-UP 1. Lay out wing top up and assemble the poles. 2. Shorten / adjust guy cord to half-length and lay out away from wing. PACKAGE INCLUDES: Wing, 1 center pole, 2 support poles, 6 guy cords with tensioners, 6 stakes TRANQUILITY WING ™...
- Page 2 WING SHELTER 1. Stake out cord ends without pulling on the wing, and cord does not need to be pulled tight. 2. Insert poles under the wing into the grommets. The center pole is the longest pole. 3. Adjust cord and re-stake as needed for a taught pitch.
Need help?
Do you have a question about the TRANQUILITY WING and is the answer not in the manual?
Questions and answers