Cables to Go DOCSIS Cable Modem User Manual page 25

DOCSIS 1.0/ 1.1 Equivalent Cable Modem
Using USB with the Windows 2000 or Windows XP Operating System
1. Click Network on Control Panel, make sure USB Cable Modem is installed
NOTE: If you have no TCP/IP protocol, press Add, highlight Protocol and press Add.
Then next step is to highlight Microsoft and TCP/IP, and then press OK to complete the
adding TCP/IP protocol process.
2. Click TCP/IP -> Conexant USB Cable Modem
3. Click Properties
4. Click the IP Address TAB, choose Obtain an IP address automatically
21