Summary of Contents for Echomaster P-BUA-PROMASTER CITY
- Page 1 P-BUA-PROMASTER CITY Wiring Harness for Backup Alarm 2015-2020 Ram Promaster City INSTALLATION MANUAL...
-
Page 2: What's Included
Thank you for purchasing the P-BUA-PROMASTER CITY Table of Contents Page 3 - Tools Required For Installation WHAT’S INCLUDED: • Vehicle Specific Wire Harness (P-BUA-PROMASTER CITY) COMPATIBLE ACCESSORIES: • 97dB Backup Alarm (BUA-97C) • 97dB White Noise Backup Alarm (BUA-97WNC) -
Page 3: Tools Required
TOOLS REQUIRED: 1. 10mm Nut-setter 2. #3 Phillips Bit 3. Impact Drill... - Page 4 Use an impact drill and #3 Phillips bit to remove the driver side tail lamp assembly STEP 2: Unplug the OEM tail lamp connector and install the P-BUA-PROMASTER CITY harness between the OEM connectors STEP 3: Route the harness down the tail lamp cavity...
- Page 5 STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle Note: (2) 10mm TEK screws are provided with the compatible backup alarm STEP 5: Plug the backup alarm connector into the mating connector on the P-BUA- PROMASTER CITY harness.
- Page 6 Phone – 866-766-2267 E-Mail – support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.com...
Need help?
Do you have a question about the P-BUA-PROMASTER CITY and is the answer not in the manual?
Questions and answers