Care And Cleaning - Glacier bay HD873X-3601 Installation And Care Manual

Installation (continued)
12
Checking for leaks
□
Turn the handle (F) to the full on mixed position.
□
When the valve body (D) is turned on, water
normally ows through the tub spout (J). To
activate the shower, turn the valve on and pull
the knob (1) up. Hold the knob (1) until the water
ows continuously from the shower arm (B).
Check for leaks.
□
Shut off the water at the faucet and supply lines.
13
Installing the shower head
□
Make sure the washer (Q) is inside the shower
arm (B). Attach the shower head (C) to the
shower arm (B). Tighten the shower head (C)
with the wrench (R).

Care and Cleaning

□
To clean, wipe down with a damp cloth and dry with a towel.
□
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
UP
FOR
SHOWER
1
J
B
J
Q
C
14
F
B
R
D