PREFACE Please read all the warnings and instructions carefully before using this product. Save these documents because they contain some important information about the product. TABLE OF CONTENTS INTELLIGENT DINOSAUR BUTTON DESCRIPTION REMOTE CONTROL KEY DESCRIPTION INSTALLATION OF INTELLIGENT DINOSAUR BATTERY REMOTE CONTROL BATTERY INSTALLATION ADDING WATER FOR THE INTELLIGENT DINOSAUR...
REMOTE CONTROL KEY DESCRIPTION Forward Smoke effect Turn left Turn right Execute program Programming Backward Demo Dancing *PROGRAMMING OPERATION INSTRUCTIONS: Press "Programming" button to start editing action, then press Turn left/Turn right/Forward/Backward/Dancing/Smoke effect/Demo etc button (press the order of buttons can be arbitrary group). Finally, press the “Execute program” button to finish programming.
INSTALLATION OF INTELLIGENT DINOSAUR BATTERY Open the battery cover of the body,put 1.5V AA*4 batteries into the battery cover according to positive and negative electrodes ,close the battery cover and tighten the screws up.(see the figure) battery not included.
REMOTE CONTROL BATTERY INSTALLATION First, Remove the screw on the battery cover and then remove the battery cover itself. Next, install 2 1.5V AA battery with the correct polarity. Finally replace the battery cover and screw it in place.( (battery needs to be purchased separately)
ADDING WATER FOR THE INTELLIGENT DINOSAUR Switch the intelligent dinosaur switch to "OFF", pull out the plug of the dinosaur's head, and use the water injector to deliver water for the intelligent dinosaurs. (as shown in the following figure) Note: please use drinking water.
Page 8
PLEASE DEAL WITH AND RECYCLE TOYS ACCORDING TO LOCAL LAWS AND REGULATIONS.