Install Instruction; Restrictions - Atexor Slam Instructions For Safe Use

1.3 Install instruction

Easiest intallation is in the ambient room temperature. Cold temperatures may affect the
elastisity of the rubber compound. If it seems difficult to stretch the protector on outside
ambient temperatures, consider moving to indoors and allow the protector to warm up.
®
Position the SLAM
luminary. Picture 1.
Strecth the narrow end of the protector over the luminary end part and slide the protector in
place. Protector is correctly installed when the narrow end fits snuggly over the luminary PC-
tube and the ridge on the protector is positioned over the luminary end part. Pictures 2 and 3.
Picture 1.
Picture 3.

1.4 Restrictions

There are no restrictions for use on SLAM
Protector so that the narrow end is pointing towards the either end of the
4/8
Picture 2.
®
luminaries when equipped with SLAM
®
Protector.