Skyvue C-OBX-32000-P Owner's Manual page 8

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding — If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.
• Outdoor Antenna Grounding — If an outside antenna is
Article 810 of the National Electrical Code, ANSI/NFPA 70,
connected to the television equipment, be sure the antenna
provides information with regard to proper grounding of the
system is grounded so as to provide some protection against
mast and supporting structure, grounding of the lead-in wire
voltage surges and built-up static charges.
to an antenna discharge unit, size of grounding conductors,
Article 810 of the National Electrical Code, ANSI/NFPA 70,
location of antenna-discharge unit, connection to grounding
provides information with regard to proper grounding of the
electrodes, and requirements for the grounding electrode.
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product
the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.
on an unstable base can cause the product to fall, resulting in serious personal injuries as well as
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer. designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents ventilation is provided or the manufacturer's instructions are followed.
• The front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place
impact. Be careful not to be injured by broken glass pieces in case the panel breaks. the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
products (including amplifi ers) that produce heat.
• The front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with
• The LED panel is a very high technology product with 2,073,600 pixels, giving you fi ne picture details.
Occasionally, a few non-active pixels may appear on the screen as a fi xed point of blue, green or red impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other blue, green, red or yellow. Please note that this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and products (including amplifi ers) that produce heat.
• The LED panel is a very high technology product with 2,073,600 pixels, giving you fi ne picture details. unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
Occasionally, a few non-active pixels may appear on the screen as a fi xed point of blue, green or red
the equipment due to lightning and power-line surges.
blue, green, red or yellow. Please note that this does not affect the performance of your product.
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
• To prevent fi re, never place any type of candle or fl ames on the top or near the TV set. the equipment due to lightning and power-line surges.
• To prevent fi re or shock hazard, do not place the AC cord under the TV set or other heavy items. • Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
• Do not display a still picture for a long time, as this could cause an afterimage to remain. light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may
• To prevent fi re, never place any type of candle or fl ames on the top or near the TV set. result in fi re or electric shock. Exercise special caution when using the product around children.
• To prevent fi re or shock hazard, do not place the AC cord under the TV set or other heavy items.
Precautions when transporting the TV • Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
result in fi re or electric shock. Exercise special caution when using the product around children.
carry the TV by two people holding it with two hands — one hand on each side of the TV.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
carry the TV by two people holding it with two hands — one hand on each side of the TV.
Caring for the cabinet
• Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause
cracking.
Caring for the cabinet
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted with water and
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause
thoroughly wrung out, and then wipe with a soft dry cloth.
cracking.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• Do not apply insecticides or other volatile liquids.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted with water and
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers
thoroughly wrung out, and then wipe with a soft dry cloth.
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
2012 SKYVUE 2012 SKYVUE
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
6
2012 SKYVUE 2012 SKYVUE
LC-60LE632U_70LE732U_E_01.indd 4
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
GROUND
CLAMP
ELECTRIC
GROUND
SERVICE
CLAMP
EQUIPMENT
ELECTRIC
SERVICE
EQUIPMENT
NEC — NATIONAL ELECTRICAL CODE
NEC — NATIONAL ELECTRICAL CODE
All Rights Reserved. 2015 SkyVue
ANTENNA
LEAD IN WIRE
ANTENNA
ANTENNA
DISCHARGE UNIT
LEAD IN WIRE
(NEC SECTION 810-20)
ANTENNA
GROUNDING
DISCHARGE UNIT
CONDUCTORS
(NEC SECTION 810-20)
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
GROUNDING
ELECTRODE SYSTEM
CONDUCTORS
(NEC ART 250)
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250)
6 6
6 6
2011/02/21 15:45:56
®