Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kappa Manuals
  4. Lighting Equipment
  5. LMDT-810
  6. User manual

Kappa LMDT-810 User Manual

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
USER MANUAL
Model: LMDT-810
Self programming motion detector transmitter for outdoor use. IP44
FEATURES:
* 67 million code combinations, no interference from neighbours.
* Easy operation, no wiring, battery operated.
* Outdoor use, compatible with KAPPA self programming type receivers connected
to lamp or doorbell as home safety system. (Not suitable for dimmer receiver)
* Delay-off time switch design. After delay, LMDT-810 sends a signal to
switch off the receiver.
* Battery low indication.
INSTALLATION:
A. INSTALLATION STEPS:
Select required location; position 3-4 metres above ground away from trees, direct
sources of heat and direct sunlight.Remove LMDT-810 from base. Using base as a
template, mark and drill 4 suitable holes.Secure base to wall using screws.Re-attach
LMDT-810.Adjust angle and direction.
Battery replacement illustrations:
B. DETECTION ANGLE AND RANGE
a. LMDT-810 detection angle is 110 degrees. To reduce the angle of detection,
keep the attached lens cover on LMDT-810. If necessary, cut off lens cover,
determine the detection angle size from min. 20 degrees to max. 110 degrees.

Advertisement

loading

Summary of Contents for Kappa LMDT-810

  • Page 1 A. INSTALLATION STEPS: Select required location; position 3-4 metres above ground away from trees, direct sources of heat and direct sunlight.Remove LMDT-810 from base. Using base as a template, mark and drill 4 suitable holes.Secure base to wall using screws.Re-attach LMDT-810.Adjust angle and direction.
  • Page 2 Detection range, adjust LMDT-810 bracket to select required range, 10 metres max. FUNCTION OF SWITCHES: A. Delay-off Time Switch: 4 options – 5sec./1min./5min./10min. Each option indicates when the time period ends, LMDT-810 sends an ‘OFF’ signal to the receiver to switch off the receiver and its connected lamp or light.

  • Page 3: Operation

    “L” lux setting can be accurately set up (activate from the product IC). When it is darker than the “L” lux level, LMDT-810 can detect objects. A similar situation applies for switching from “H” to “M” or “H” to “L” or vice versa, switching from darker level to brighter level.

  • Page 4: Technical Specification

    D. Code deletion: Purpose of code deletion: the user does not want LMDT-810 to work with a certain receiver.In this case, the user should delete LMDT-810 code from the limited memories of the self programming receiver to release the memory to the next transmitter code setting.Place LMDT-810 in ‘SET’...
  • Page 5 LMDT-810 detects movement and sends “ON” signal to the same receiver, this receiver (lamp) starts to dim. Do not use LMDT-810 with dimmer. ** 2 x Fresh AAA (1.5V) battery installed in LMDT-810 are important for providing stable current voltage to LMDT-810 thus enhancing detection and transmission capability.