Sota Bio Turner BT9 Manual

H
ello. I'll be demonstrating
the use of the SOTA Bio
Tuner. The Bio Tuner shown
here is our latest model, the Model
BT9. Please remember to read your
Bio Tuner manual, it's filled with
great information, trouble shooting,
cautions and just everything about
the operation specifications of the
unit. It's important to read your
manual.

Inserting the Battery

The Bio Tuner is powered by a 9-Volt
Alkaline style battery shown here. The battery that you have may have a protective covering
over the terminals, just please remember to peel that protective covering off to expose the
battery terminals and here's a battery with the protective covering removed. Remember to
use Alkaline style batteries and not heavy duty. Heavy duty batteries just simply don't have
the capacity of the alkalines and the alkalines allow
your battery to do the greatest efficiency for your unit
and operate properly.
To insert the battery into your Bio Tuner is very simple.
You turn your Bio Tuner over and remove the battery
compartment lid and inside there are two plastic rings.
There's a larger negative ring at the bottom and a
smaller positive ring at the top and that's how to align
the battery as we put it into the unit but I need to
show you this first. Inside there are two spring metal
contacts and they are meant to touch the battery terminals. If they're not already pulled
forward you need to get in there, grab it with your finger and pull them forward, like on
about a 45 degree angle. They're made out of spring metal; you can't hurt it, so just bring
it forward. Take your battery, align it correctly with the plastic rings, push it in, snap it into
place, put your battery lid back on.
© 2015-2019 SOTA Instruments Inc.
How-to Video
Bio Tuner BT9
Transcription
Page 1 of 6| www.sota.com