Advertisement
Operation
TWS mode
Power on, Bluetooth connection
Follow the steps (Please confirm that your phone is built-in Bluetooth function)
1. Power on: Taking buds out from case, then they will turn on automatically.
Alternatively, touch these buds for 2 seconds to power on. The right headphone LED
alternately flashes alternately orange and white after white flashing twice on the
both sides.
2. Activate the Bluetooth function and search for "Kogan Sports TWS" referring to your
phone instructions.
3. Manually click "Kogan Sports TWS" to connect. If the indicator stops flashing and
then prompt, the connection is successful.
4. Pairing mode can just last 180 seconds. If you miss the pairing time, you need to
restart the device and operate follow the procedural mentioned steps above.
Attention
a) When they are turning on, the headset will automatically connect the last device that
you had paired.
b) The headset will lose the connection when deviate the working range of Bluetooth.
The headset will reconnect automatically if you come back to the range in 2 minutes.
c) In some cases, it won't auto on after taking off from the charging case. Please switch
it on handily.
Power off
Method 1: Put the headphones into the charging case, they will automatically shut off. If
the charging case is out of power, the headset will not automatically turn off.
Method 2: Touch MFB for 5 seconds, the white light flashes three times.
Answering incoming calls
1. Tap left or right MFB once to answer incoming calls.
2. One phone is answering a call, while another has a call retained:
a. Tap left/right MFB once again to keep the current phone call and answer incoming
calls
b. In the three-way call, tap left or right MFB for 1 second to realize two mobile phone
calls switchover.
Ending the call
Tap left or right MFB once to end the current call.
4
Advertisement
