Front Side - Asus F3P Hardware User Manual

2
Knowing the Parts

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
Wireless Switch
1
Enables or disables the built-in wireless LAN and Bluetooth (selected models). When enabled, the wire-
less status indicator will light. Windows software settings are necessary before use.
Display Panel Button
2
Press the display panel button to open the display panel.
WARNING! When opening, do not force the display panel down to the table or else
the hinges may break! Never lift the Notebook PC by the display panel!
Microphone Input Jack
3
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output
signals from audio devices. Using this jack automatically disables the built-in microphone.
Use this feature for video conferencing, voice narrations, or simple audio recordings.
SPDIF Output Jack
4
This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices
for digital audio output. Use this feature to turn the Notebook PC into a hi-fi home enter-
tainment system.
Headphone Output Jack
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC's audio out signal to
amplified speakers or headphones. Using this jack automatically disables the built-in speakers.
Flash Memory Slot
5
Normally a PCMCIA or USB memory card reader must be purchased separately in
order to use memory cards from devices such as digital cameras, MP3 players, mobile
phones, and PDAs. This Notebook PC has a built-in memory card reader that can read
many flash memory cards as specified later in this manual. The built-in memory card
reader is not only convenient, but also faster than most other forms of memory card
readers because it utilizes the high-bandwidth PCI bus.
16
ON OFF
PUSH
1 2 3 4 5