Download Print this page

Casella Orbi-Trace Field Manual

Hide thumbs Also See for Orbi-Trace:

Controls

USB-C

Port

(On Rear)

Power Up

Long press the power button to on/off the tags. A solid

green LED will appear on powering up. A Solid red LED

will appear just before shut-off. On start-up the tags will

be in the last used alert mode either buzzer or vibration.

Under normal operation, the LED will be blinking green.

Double press the power button to switch between alert

modes. As you switch between modes, the light will:

1 green LED blink = silent mode (only vibration, no

buzzer)

2 green LED blinks = medium volume mode (vibration +

buzzer)

3 green LED blinks = high volume mode (vibration +

buzzer)

FG96-01

Battery

Power

LED

Button

Field Guide

Alert

LED

Table of Contents

Do you have a question about the Orbi-Trace and is the answer not in the manual?

Page 1 Field Guide Controls Battery Power Button USB-C Alert Port Belt Clip (On Rear) Power Up Long press the power button to on/off the tags. A solid green LED will appear on powering up. A Solid red LED will appear just before shut-off. On start-up the tags will be in the last used alert mode either buzzer or vibration.
Page 2 Belt Clip The belt-clip on the back can be detached. The clip is also available to order separately as an accessory. Further Information Visit the ‘Support’ section www.casellasolutions.com for further information on use of the Orbi-Trace Tag and associated products. FG96-01...