Table of Contents
Advertisement
2
Knowing the Parts
Right Side
Refer to the diagram below to identify the components on this side of the Notebook PC.
PC Card Slot
1
One PCMCIA 2.1 compliant PC Card socket is available to support one type I/II PC card. The
socket supports 32-bit CardBus. This allows accommodation of Notebook PC expansion options
such as memory cards, ISDN, SCSI, Smart Cards, and wireless network adapters.
PC Card Eject
2
Use this button to eject optional PC cards. This button is mechanical (not electronic) so a small
force is required and the Notebook PC does not have to be turned ON to eject PC cards.
SPDIF Output Jack
3
This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant de-
vices for digital audio output. Use this feature to turn the Notebook PC into a hi-fi home
entertainment system.
Headphone Output Jack
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC's audio out signal to
amplified speakers or headphones. Using this jack automatically disables the built-in speakers.
Microphone Input Jack
4
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output
signals from audio devices. Using this jack automatically disables the built-in microphone.
Use this feature for video conferencing, voice narrations, or simple audio recordings.
USB Port (2.0/1.1)
2.0
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices
to run simultaneously on a single computer, with some peripherals acting as additional plug-in
sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected
or disconnected without restarting the computer.
16
1
2
3
4
5
6
7
8
Hide quick links:
Advertisement
Table of Contents
