To connect a projector
1.
Turn off the computer before you connect the projector.
2.
Locate the VGA (Monitor)
3.
Plug the display cable (not supplied) into the VGA port, and plug the opposite end into the appropriate port on
the projector.
4.
Plug the audio cable (not supplied) into the Headphone jack, and plug the opposite end into the appropriate port
on the projector.
5.
Verify that the power cord is plugged into the projector and an AC outlet.
6.
Turn on all external devices before you turn on the computer.
Connecting a Projector
See the manual that came with your projector for more information on its installation and use.
port and the Headphone
jack.
Page 71