Table of Contents
Advertisement
Icon
Menu and
Submenus
Vertical
Position
Sharpness
Pixel Clock
Phase
Dynamic
Contrast
Response
Time
Reset Display Restores the display settings to factory defaults.
|
Operating the Monitor
30
Description
Use
or
to adjust the image up or down.
Minimum is '0' (-).
Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position adjustments
are only available for "VGA" input.
Makes the image look sharper or softer.
Use
or
to adjust the sharpness from '0' to '100'.
The Phase and Pixel Clock adjustments allow you to adjust
your monitor to your preference.
Use the
or
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and then
use Phase (fine) again.
NOTE: Pixel Clock and Phase Adjustments are only available
when your monitor is connected using the VGA cable.
Allows you to increase the level of contrast to provide sharper
and more detailed image quality.
Push the
button to select the Dynamic Contrast "On"
or "Off".
NOTE: For Game and Movie preset mode only.
NOTE: Dynamic Contrast provides higher contrast if you
select Game or Movie preset mode.
Allows you to set the Response Time to Normal or Fast.
Advertisement
Table of Contents
