Cable Your Router - NETGEAR R7960P User Manual

Ac3600 tri-bandwifi router
Hide thumbs Also See for R7960P:
Table of Contents

Advertisement

Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P

Cable Your Router

The following image shows how to cable your router:
Figure 4. Cable your Router
To cable your router:
1. Unplug your modem's power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3. Connect your modem to the Internet port of your router with the black Ethernet
cable that came with your router.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. Press the Power On/Off button on the back panel of the router.
Hardware Setup
15
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nighthawk x6s

Table of Contents