Using Net Movie Mode - Sony PCG-R505ESP VAIO User Guide (primary manual) User Manual

✍
You must be connected to the Internet before attempting to upload or e-mail your still
images or videos.

Using Net Movie Mode

1 Click Start in the Windows taskbar, click All Programs, point to Smart
Capture, and click Smart Capture. The Smart Capture main window
appears.
2 Connect your i.LINK compatible digital camcorder to your computer with
an i.LINK® cable (optional). An image appears in the Smart Capture main
window.
3 Verify that the Mode dial is set to Net Movie. Click the Mode dial to switch
between Still mode and Net Movie mode.
4 Click Options to view the available options for your movie capture. The
Recording Options window appears.
Recording Options window
Format tab view
The Recording Options window has three tabs:
Format — You can adjust the compression rate for your movies in
❑
MPEG1 format or choose the AVI option for no compression. You can
also set the maximum recording time for your movie capture.
Smart Capture Software
Capture Button tab view
51