Sony PCG-R505EC Primary User Manual page 66

VAIO® Computer User Guide
Connecting Projector to the Computer
To Headphones
RGB signal cable
(optional)
Audio cable
(optional)
To connect a projector (such as a Sony LCD Projector) to your docking station
1 Make sure the projector is plugged into an AC outlet.
2 Open the rear panel of the docking station, and locate the monitor port.
3 Plug the RGB signal cable into the monitor port, and make sure it is
connected to the projector.
4 Plug the audio cable into the green Headphone jack on the right side of the
computer, and make sure it is connected to the projector.
5 Plug the audio cable into the green Headphone jack on the right side of the
computer.
66
To Monitor
Projector
Power cord